HOME > 제품소개 > 범용플라스틱 > 엔지니어링 플라스틱
Workable Resin
Workable Resin
Products Characteristics Color Density Hardness Tg Applications Tensile Strength [MPa] Flexural Strength [MPa]
SW150-NGR/NWH - Excellent form machining
- Excellent anti-sagging resistance when Applying high-thickness lamination
- Low exothermic A+B components epoxy paste resin
- Outstanding low shrinkage rate
- Room temperature curing type
- Hand lay-up resin (Normal / Fast curing)		 Brown,
White		 1.0~1.03,
± 0.01		 73,
± 2		 - Checking fixture for press and injection 19 58
SW200-NOR/NWH - Hand lay-up resin for low density
- Excellent anti-sagging resistance when applying high-thickness lamination
- Workable resin for automobile master modeling
- Good low-hardness, NC machining
- A+B components type (Normal / Fast curing)		 Orange,
White		 0.63,
± 0.02		 65,
± 2		 - Interior/Exterior design 17 49
SW250-NBR - Medium density A/B components type resin
- Hand lay-up resin for wooden patterns
- Easy mixable putty
- Improved abrasion-resistance for end-mill during machining
- Two types of Normal / Fast curing		 Brown 0.77,
± 0.02		 64,
± 2		 - Interior/Exterior design 17 49
SW300-NBR - Low density manual lay-up resin
- Excellent adhesion to substrate
- Easy mixable putty
- Reduction of hand work time
- Superior NC machining / low dust emissions
- A/B components type		 Brown 0.61,
± 0.01		 63,
± 3		 - Interior/Exterior design - -
SW325-NBR - Hand lay-up resin for Wind blades
- Excellent adhesion for various substrates
- Superior mixable putty for low density
- Reduction of hand work time
- Extended tools life due to improvement of abrasion-resistance		 Brown 0.61,
± 0.01		 63,
± 3		 70 Interior/Exterior design Export Only - -
SW350-NOR - Low-hardness type workable lay-up resin
- Superior NC machining speed
- Improved anti-sagging resistance after hand lay-up
- Outstanding adhesion		 Brown,
Orange		 0.5,
± 0.01		 48,
± 2		 - Interior/Exterior design 14 29

* Technical statements and recommendations refer to current standard of technique and are based on our own experiences.
Further development and improvements are reserved. Due to the variety of processing possibilities own experiments are recommended to optimise results.